CINEON Docs

Optics

Effects that act on light before it reaches the film — glass, flare, stray light and a camera in motion.

Aesthetic

Photographic artefacts made in front of the lens. Pick one with Effect:

  • Motion — the streak a moving subject or a moving camera leaves during the exposure. Field sets how the frame sweeps: Directional is a pan, Radial a dolly or a zoom, Spin the camera rolled during the exposure. Driven by decides how much each pixel moves: Whole frame, Centre, or Depth, which holds the tracked plane still while the rest sweeps — the panning shot. Depth is estimated from the photo; until the estimate lands, or if it fails, the whole frame sweeps.
  • Starburst — a cross screen filter. Fine grooves ruled into the glass diffract each point of light into rays. It responds to light sources, not bright surfaces: raise Isolation so only points that outshine their surroundings grow rays. Dispersion opens each ray into a spectrum.
  • Diffusion — a Pro-Mist. Light from bright areas scatters into the pixels around them, so a lamp gains a halo while the picture underneath stays sharp. At Black zero the halo lifts the shadows; raised, it becomes a Black Pro-Mist that leaves the black behind the lamp alone.
  • Tilt-Shift — a selective-focus band from a tilted lens. Its position and angle describe the plane you choose; the band is geometric, not depth-estimated.
EffectSectionControls
MotionAmountLength, Angle, Tracking, Tracking Range, Falloff, Highlights
MotionCentreCentre X, Centre Y (radial and spin fields)
StarburstStarPoints, Angle, Length, Thickness, Softness, Decay
StarburstSourcesThreshold, Isolation
StarburstLightIntensity, Dispersion, Bleach
DiffusionScatterStrength, Radius, Threshold
DiffusionCharacterBlack, Bleach
Tilt-ShiftFocus PlanePosition, Angle, Focus Width, Feather
Tilt-ShiftLensBlur

Bloom

Light overflowing around bright areas, as on film and anamorphic lenses. Profile starts from a format: 8mm (small format, high diffusion), 16mm (organic texture), 35mm (cinema standard) or 65mm (IMAX, sharp and subtle).

SectionControls
ThresholdsHighlights, Source Limiter
DiffusionDiffusion, Details
ColorSaturation, Save Lights
OutputAmplify, Impact

Show Mask displays which areas trigger the bloom.

Chromatic Aberration

The color fringing of a real lens, where colors don't converge at the same point — strongest near the edges of the frame. Start from one of the six Aberration Presets: Prismatic or Lateral fringing, each at Subtle, Medium or Strong.

SectionControls
Channel SeparationRed Offset, Blue Offset, Angle
FalloffEdge Falloff, Dead Zone
Highlight GateThreshold, Blend — limit fringing to bright areas
Lateral · ScaleScale Spread, Edge Sharpness (lateral)
Prismatic · SpectralArc Bend, Spectral Width (prismatic)

Lens Distortion

Geometric distortion from lens curvature: barrel distortion bows lines outward (wide-angle), pincushion pulls them inward (telephoto). Pick a Lens Profile to start, and turn on Clamp to clamp the distorted borders instead of stretching them.

SectionControls
Brown-Conradyk1 — Pincushion / Barrel, k2 — Higher Order, p1 — Tangential
Focus BreathingAmount, Focus Distance
Field CurvatureBlur Amount, Start Radius, H/V Asymmetry, Petzval Swirl
Chromatic AberrationSeparation, Fringe Blur
Physical VignettingAmount, Falloff Exponent, H/V Shape

Lens/Emulsion MTF

The small natural softening every real lens and film add before grain and development. It is modelled from the contrast a real lens resolves on a striped target, not a theoretical perfect curve.

SectionControls
Lens MTFStrength, Field Falloff
AberrationsComa, Trefoil

Light Leak

Film exposed to stray light, typically at the edges of the cartridge or through a poorly sealed camera back — with an anamorphic streak and lens ghosts. Randomize Leak Structure draws a new pattern.

SectionControls
Light LeakAmount, Temperature
ComponentsStreak, Ghosts
Source PositionSource X, Source Y
StreakStreak Angle
GhostsGhost Count
StructureSeed

Optical Engine

A physically based simulation of real lens designs: bokeh shape, out-of-focus softness and subtle distortions vary by design. Pick a Lens Design: Biotar 75mm f/1.5, Double Gauss 50mm, Planar (Wide) or Tessar (Classic).

SectionControls
OpticsFocus Distance, Aperture
Optical EffectsVignette, Flare
OutputStrength

Veiling Glare

Light scattered inside the lens spreads back over the whole frame with no cutoff: a uniform veil that lifts the blacks and flattens contrast, unlike a localised glow.

SectionControls
Stray LightAmount (Scattered Fraction), Conservation (Contrast Loss)
Veil CharacterUniformity (Global Veil)
Glare Spread FunctionSpread (PSF Radius), Falloff (Tail Weight)
Coating ResponseTint (Cool / Warm)

Mask Mode displays where the veil lands.

Vignette

Edge darkening from lens falloff. Size sets the clear field, Feather softens the edge, and a positive Exposure compensates for the light loss instead of darkening. Style Profiles are starting points, not measurements of specific lenses: Subtle, Classic, Oval, Bright, Glow, Tunnel and Off-Axis.

SectionControls
ExposureExposure
ShapeSize, Feather, Aspect Ratio X, Aspect Ratio Y
Center OffsetX, Y

Show Mask displays the vignette on its own.

On this page